[High-efficiency Freon Free Compressor]--This 75gal aquarium chiller adopts a energy-saving refrigeration compressor, using R134a refrigerant, circulating cooling without pollution and do not need to be supplemented. [Built-in Fan for Fast Cooling]--The two built-in fans can dissipate compressor heat well, so that the compressor can work efficiently for a long time. In addition, there are a large number of heat dissipation holes on both sides of the chiller, so there must be a space of 6 inch/15cm around the chiller to ensure good air circulation. [Safety Protection Function]--The water cooler is equipped with an overcurrent automatic shutdown protection system and a power-off temperature memory system.After powering off and restarting, the chiller will continue to cool according to the original set temperature. [Operate Tips]--The cooling effect depends greatly on the water volume and the room temperature. Generally speaking, in the range of about 5-10F below room temperature if your water volume is close to rated volume. Less water for better cooling effect. [Widely Applications]--The water chiller is equipped with corrosion-resistant pure titanium pump, which can run perfectly in fresh and salt water.
Widely used in aquariums, fish tanks, small hydroponic system, etc. Cooling Fans & Vents Design.
The cooling fan and side vents are designed to dissipate heat in time, which can better maintain the chiller, save electricity and time, and keep the water in the fish tank always cool. Check and clean the water pump monthly to to make sure the water. One-button switch design can easily and conveniently control the operation of the machine, you can choose to use or end according to actual needs. FAQ about Aquarium Water Chiller. Improper installation of the pipeline: Put more sealing rings, causing gaps in the water inlet/outlet.
Only one sealing ring is needed for one inlet/outlet. Long-term use may cause the water pipe connection to become loose or larger: try to add some vacuum grease to the pipe. The pump is placed too high, resulting in too high water flow pressure. Shutdown temp>The current display temp of the machine. The pump is broken, We will send a new replacement.
Distorted water pipes cause poor water flow. The temp displayed on the screen is inconsistent with the water temp measured by other thermometers?
The influence of external factors: such as the lights in the fish tank, the indoor temp. The temp measure position is wrong: The water chiller detects the overall water temp of the fish tank, your thermometer measure at a certain measure position.
Controller error: consider temperature calibration F2. Material: Stainless Steel Color: Black. Most items are offered with Free return within 30 days! This item is in the category "Pet Supplies\Fish & Aquariums\Heaters & Chillers".The seller is "fitnet-us" and is located in this country: US. This item can be shipped to United States.