It also uses a corrosion-resistant pure titanium pump, which can achieve the best between fresh water and seawater. Built-In Fans for Fast Cooling.2 cooling fans are designed to dissipate heat in time, increase the service life of the compressor and save electricity, and better take care of your chiller. In addition, there are a large number of cooling vents on the 2 sides of the chiller to speed up heat dissipation to keep the water in the fish tank always cool. So leave 6 inches/15 cm of space around the chiller to ensure good air circulation. The special noise-reduction design makes the compressor run very quietly, the low-noise operation will not affect your daily work and rest. And monitors the water temperature in real-time, when the water temperature is higher than the starting temperature, the chiller automatically runs to cool down. Every chiller has a tolerance value setting (F1) of 1-60. For example, I set the starting temperature to 79°F and the tolerance value to 2, then when the chiller detects that the temperature of the chiller's water is 79°F, the chiller will automatically run and cool down until the water temperature is 77°F.
Repeat cycle to cool down. The cooling temp is affected by the ambient temp and the size of the fish tank.
For example, the room temp is 77? Using AL-160, the water with a capacity of 150L can drop to75-78? For 35 gal/132L is almost down to 73?And if you want to drop below 68F, the water volume is recommended to be below 80L. So, If you pursuit a better cooling effect and more rapid cooling speed please reduce water volume. The less water, the better the cooling effect. Widely used in aquariums, fish tanks, small hydroponic systems, axolotl suitable for aquatic organisms, freshwater saltwater aquaculture, fish crystal shrimp corals coral reefs, and jellyfish. The proper temperature is the prerequisite for the reproduction of aquatic organisms. Our chiller is ideal for adjusting the water temperature. Intelligent chiller, efficient cooling, fast heat dissipation, low energy consumption, low noise and built-in silent fan, better protect your aquarium and make you fall in love with fish farming. Fast & Efficient cooling water, and keep low noise operation.
Cooling Fans & Vents Design. The cooling fan and side vents are designed to dissipate heat in time, which can better maintain the chiller, save electricity and time, and keep the water in the fish tank always cool. Please heck and clean the water pump monthly to to make sure the water. The water inlet and outlet are convenient for the chiller to perform cyclic refrigeration, making your fish more enjoyable.Side hand-held design, allowing you to move more conveniently, you can easily move from the living room to the bedroom. One-button switch design can easily and conveniently control the operation of the machine, you can choose to use or end according to actual needs.
Power-on delay is 2-3 minutes, please wait patiently for COOL to long light. Cool:Flashing: turning on, Long light : working, Light off: work off.
Set: Stop temp set ; Tolerance set F1 ; Calibration set F2. Rst: Save and Return to the menu (Displays current temp of the water tank). It is widely used in fresh water in the fields of homes, hotel halls, aquariums, fish farms and so on. Or seaweed, seawater fish tank. Most items are offered with Free return within 30 days!
This item is in the category "Pet Supplies\Fish & Aquariums\Heaters & Chillers". The seller is "genersee" and is located in this country: US. This item can be shipped to United States.